Topsoil Calculator

Work out how much topsoil you need to level a lawn, fill a raised bed or top up a border. You get the volume in cubic metres, which is how most suppliers sell it, plus an approximate weight.

Want a full plan for the job? Try the Lawn Planner. It asks a few questions and builds your shopping list, steps and supplier questions.

For odd shapes, split the area into rectangles and add the results.

The finished depth you want to add. Measure in a few places if the ground is uneven.

Loose topsoil settles after it is spread and firmed. 10% is a rule-of-thumb starting point.

More options

Used only for the tonnes estimate. Topsoil weight varies a lot with moisture and soil type, so ask your supplier for theirs. 1.3 t/m³ is an example figure.

Enter the bag size in litres to see how many bags you need. A 1 m³ bulk bag is 1,000 litres.

Your estimate

Topsoil needed (with allowance)

About 2.64 m³

Area
24 m²
Topsoil before allowance
2.4 m³
Approximate weight
3.43 tonnesAt 1.3 t/m³. Check with your supplier.

Based on

  • 24 m² at 0.1 m deep
  • 10% allowance for settling
  • 1.3 t/m³ for the weight estimate

Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.

How the calculation works

The calculator multiplies the area by the depth to get the volume in cubic metres (m³), then adds an allowance for settling.

For the weight, it multiplies the volume by the weight per cubic metre (bulk density). This is only approximate because wet soil is much heavier than dry soil.

Volume = area × depth × (1 + allowance ÷ 100)
Weight (tonnes) ≈ volume × weight per m³
Bags = volume in litres ÷ bag size (rounded up)

Assumptions

  • The area is treated as level, with an even depth across it.
  • The 10% settling allowance is a rule of thumb, not a fixed figure. Very loose or screened soil can settle more.
  • The 1.3 t/m³ weight is an example only. Topsoil weight depends on moisture, soil type and how loose it is. Ask your supplier for their figure if you are buying by the tonne.
  • We don’t assume a bag size. Enter yours to get a bag count.

Example: a 6 m × 4 m area, 10 cm deep

  1. Area = 6 × 4 = 24 m².
  2. Volume = 24 × 0.10 = 2.4 m³.
  3. Add 10% for settling: 2.4 × 1.10 = 2.64 m³.
  4. Approximate weight at 1.3 t/m³: 2.64 × 1.3 ≈ 3.43 tonnes.

Useful tips

  • Ask whether the topsoil is screened (sieved). Screened soil is easier to level and better for lawns.
  • Check that a delivery lorry can get close to where the soil needs to go. Moving several cubic metres by barrow takes a long time.
  • Spread and firm the soil in layers, then leave it to settle before final levelling and sowing if you can.

Frequently asked questions

How deep should topsoil be for a new lawn?

It varies with what is underneath and who you ask, so we don’t set a standard depth. Your landscaper or supplier can advise for your site. Enter your chosen depth and the calculator does the maths.

Should I buy topsoil by the tonne or by the cubic metre?

Either is fine. Just compare like with like. Because weight per m³ varies, ask the supplier how much volume you get per tonne if they sell by weight.

How many litres are in a cubic metre?

1 m³ = 1,000 litres. So a 1 m³ bulk bag holds the same as twenty 50-litre bags.

Was this calculator helpful?