Gravel Calculator
Work out how much gravel, chippings or decorative stone you need for a driveway, path or garden area. Gravel is usually sold by the tonne or in bulk bags, so the main result is in tonnes.
Want a full plan for the job? Try the Gravel Driveway & Path Planner. It asks a few questions and builds your shopping list, steps and supplier questions.
Your estimate
Gravel needed (with allowance)
About 3.52 tonnes
- Area
- 40 m²
- Volume (with allowance)
- 2.2 m³
- Volume before allowance
- 2 m³
Based on
- 40 m² at 0.05 m deep
- 10% allowance
- 1.6 t/m³ to convert volume to weight
Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.
How the calculation works
The area is multiplied by the depth to get the volume in cubic metres, and an allowance is added.
The volume is converted to weight using the weight per cubic metre (bulk density) of the stone.
Volume = area × depth × (1 + allowance ÷ 100)
Weight (tonnes) = volume × weight per m³
Bags = weight (kg) ÷ bag size (rounded up)Assumptions
- The area is level with an even depth of gravel.
- Weight per m³ varies with the type and size of stone. 1.6 t/m³ is an example value. Ask your supplier for the figure for the product you’re buying, especially for large orders.
- This covers the top gravel layer only. Driveways normally need a compacted sub-base underneath, which is a separate material and calculation.
- The 10% allowance is a rule of thumb.
Example: a 10 m × 4 m area, 5 cm deep
- Area = 10 × 4 = 40 m².
- Volume = 40 × 0.05 = 2.0 m³.
- Add 10%: 2.2 m³.
- Weight at 1.6 t/m³: 2.2 × 1.6 = 3.52 tonnes.
Useful tips
- A weed membrane under decorative gravel cuts down on weeding.
- Deep, loose gravel is hard to walk and drive on. Follow your supplier’s guidance on depth for the stone size.
- Bulk bags are often better value than lots of small bags. Check access for the delivery lorry and where the bag can be dropped.
Frequently asked questions
How many tonnes of gravel do I need for a driveway?
Measure the area, choose the depth of the gravel layer, and the calculator gives the tonnes. Remember that most driveways also need a sub-base under the gravel.
How do I convert cubic metres of gravel to tonnes?
Multiply the volume by the weight per cubic metre for that stone. The figure varies by product, so ask your supplier for theirs.
What depth of gravel is best for a path?
It depends on the stone size and use. Your supplier can recommend a depth for the product. Enter it here to get the quantity.