Flooring Calculator
Work out how much laminate, engineered wood or vinyl click flooring to buy. Enter the room size and the coverage printed on the box, and get packs with an allowance for cutting, plus underlay.
Want a full plan for the job? Try the Flooring Planner. It asks a few questions and builds your shopping list, steps and supplier questions.
Your estimate
Flooring to buy
About 15.4 m²
- Room area (before allowance)
- 14 m²
- With 10% allowance
- 15.4 m²
Based on
- 14 m² of floor
- 10% extra for cutting
- Pack and roll sizes come from you or the product
Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.
How the calculation works
The calculator finds the floor area, adds your allowance for cutting and mistakes, and divides by the area one pack covers, rounding up to whole packs.
Underlay is worked out on the plain floor area, as rolls are laid edge to edge.
Area = length × width
Area with allowance = area × (1 + allowance ÷ 100)
Packs = area with allowance ÷ m² per pack (rounded up)
Underlay rolls = area ÷ m² per roll (rounded up)Assumptions
- Pack and roll coverage must come from your product. Pack sizes differ between brands and board thicknesses.
- The 10% allowance is a rule of thumb for a straight lay. Diagonal and herringbone patterns waste more.
- You don’t need to take the expansion gap round the edges off the area. Leave the gap your flooring’s instructions ask for when you lay it.
Example: a 4 × 3.5 m room, 10% extra, packs of 2.2 m²
- Area: 4 × 3.5 = 14 m².
- With 10%: 15.4 m².
- Packs: 15.4 ÷ 2.2 = 7 packs.
Useful tips
- Keep a spare pack. Ranges get discontinued, and a matching board is hard to find years later.
- Leave packs flat in the room for a day or two before laying, or as long as the instructions say, so the boards settle to the room.
- Measure each room separately and add up the packs: one pack rarely spans two rooms neatly.
Frequently asked questions
How much extra flooring should I buy?
A rule of thumb is about 10% for a straight lay in a simple room, more for awkward rooms, diagonal or herringbone patterns.
Do I need underlay?
Most click floors need one unless they have underlay built in. On concrete, a damp-proof layer is usually needed too. Follow your flooring’s instructions.
Do I take off the expansion gap when measuring?
No. Measure wall to wall. The gap is left when you lay the floor and is usually hidden by skirting or beading.