Attic Insulation Calculator

Work out how many rolls of insulation to buy to bring your attic or loft up to the depth you want. Enter the area, what’s there now and the roll details from the label.

Want a full plan for the job? Try the Attic Insulation Planner. It asks a few questions and builds your shopping list, steps and supplier questions.

For odd shapes, split the area into rectangles and add the results.

About 270–300 mm of mineral wool is usually recommended, depending on where you live. Other materials differ, so check the product.

From the label. 200 mm is only an example.

From the label. 5 m² is only an example.

Your estimate

Rolls needed

10 rolls

Attic floor area
48 m²
Top-up needed
200 mm
Layers
1Taking it to 300 mm.

Based on

  • Every layer covers the whole floor
  • Roll thickness and coverage from you or the label

Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.

How the calculation works

The top-up is the depth you want less the depth there now. It’s divided by the roll thickness and rounded up to whole layers, since rolls come in fixed thicknesses.

Each layer covers the whole floor, so rolls = layers × area ÷ the coverage of one roll.

Top-up = target depth − existing depth
Layers = top-up ÷ roll thickness (rounded up)
Rolls = layers × area ÷ m² per roll (rounded up)

Assumptions

  • The recommended depth depends on the material and where you live: about 270–300 mm for mineral wool. The insulation planner fills in the figure for your country.
  • Roll thickness and coverage come from the label. Thicker rolls cover less area.
  • The area is the attic floor, roughly the footprint of the rooms below.

Example: a 48 m² attic with 100 mm, topped up to 300 mm with 200 mm rolls covering 5 m²

  1. Top-up: 300 − 100 = 200 mm, so 1 layer of 200 mm rolls.
  2. Rolls: 1 × 48 ÷ 5 = 9.6, so 10 rolls.

Useful tips

  • Lay the top-up layer across the joists, at right angles to the layer below.
  • Keep the eaves clear for ventilation, and don’t cover recessed downlights unless they’re designed for it.
  • Grants can help with attic insulation. Check what’s available before you start.

Frequently asked questions

How thick should attic insulation be?

About 270–300 mm of mineral wool is usually recommended, depending on where you live. The insulation planner fills in the figure for your country.

Can I lay new insulation on top of old?

Yes, if the old insulation is dry and in good condition. Lay the new layer across the joists.

Can I board over my attic insulation?

Not directly on the joists, as that squashes it. Use raised platform legs so the boards sit above the full depth.

Was this calculator helpful?