Paint Calculator

Work out how much paint to buy for a room. Enter the room size and the coverage printed on your tin, and get litres for the walls and ceiling, and tins if you know the tin size.

Want a full plan for the job? Try the Room Painting Planner. It asks a few questions and builds your shopping list, steps and supplier questions.

Measure from the floor (or the top of the skirting) to the ceiling.

Width × height of each window, added up. Leave blank to keep them in, which gives you a little spare.

Most tins recommend two coats. A big colour change or new plaster can need more. Check your tin.

Printed on the tin as m² per litre. 14 is only an example (a standard vinyl matt); trade paints are often higher. “Up to” figures are best case, so rough or porous walls take more.

More options

Enter the tin size to see how many tins you need.

A common internal door is 762 mm wide. Measure yours.

A common internal door is 1981 mm high. Measure yours.

Your estimate

Paint needed

About 4.9 litres

Walls
34.49 m²: 4.9 litres

Based on

  • 34.49 m² to paint
  • 2 coats at 14 m² per litre
  • The coverage comes from you or the tin

Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.

How the calculation works

Wall area is the distance round the room (twice the length plus twice the width) times the wall height, less the doors and any windows you enter.

Ceiling area is the length times the width. The total is multiplied by the number of coats and divided by the coverage on the tin.

Walls (m²) = 2 × (length + width) × height − doors − windows
Ceiling (m²) = length × width
Litres = area × coats ÷ coverage (m² per litre)
Tins = litres ÷ tin size (rounded up)

Assumptions

  • Coverage must come from your tin. Makers print a best-case “up to” figure; rough, porous or patched walls use more. The 14 m² per litre default is only an example.
  • Doors are taken as 762 × 1981 mm, a common internal door size, unless you change it under More options.
  • Woodwork (skirting, doors and frames) usually takes a different paint and isn’t included.
  • No extra allowance is added. Rounding up to whole tins usually leaves a little for touch-ups.

Example: walls of a 4 × 3.5 m room, 2.4 m high, one door, two coats at 14 m²/L

  1. Perimeter: 2 × (4 + 3.5) = 15 m. Walls: 15 × 2.4 = 36 m².
  2. Less one door: 0.762 × 1.981 = 1.51 m², leaving 34.49 m².
  3. Paint: 34.49 × 2 ÷ 14 = 4.9 litres.

Useful tips

  • Buy all the paint for a room from the same batch, or mix tins together, so the colour is even.
  • New plaster usually needs a diluted “mist coat” first. Follow the paint maker’s advice for new plaster.
  • Fill cracks and sand them smooth before you paint. Paint shows every flaw.

Frequently asked questions

How much paint do I need for a room?

Measure the walls (perimeter × height), take off the doors and windows, multiply by the number of coats and divide by the coverage on your tin. The calculator does this for you.

How many coats of paint do I need?

Most tins recommend two. A big colour change, or bare plaster, can need a third. Check the tin.

Should I take off doors and windows?

Taking off doors gives a closer figure. Leaving windows in gives you a little spare, which is handy for touch-ups.

Was this calculator helpful?