Wallpaper Calculator

Work out how many rolls of wallpaper to buy for a room or a feature wall. The calculator counts strips the way decorators do, so the pattern repeat is allowed for.

Want a full plan for the job? Try the Wallpaper Planner. It asks a few questions and builds your shopping list, steps and supplier questions.

From the label. Leave blank for none.

More options

A standard roll is 10.05 m. Check yours.

A standard roll is 53 cm. Check yours.

A rule of thumb: about 10 cm.

Your estimate

Rolls needed

8 rolls

Wall to cover
15 m
Strips needed
29
Strips per roll
4

Based on

  • Doors and windows not taken off
  • Roll size, pattern repeat and trimming from you or the label

Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.

How the calculation works

Each strip is the wall height plus a trimming allowance plus one pattern repeat. The number of whole strips you can cut from a roll is the roll length divided by that, rounded down.

The number of strips is the width to cover divided by the roll width, rounded up. Rolls = strips ÷ strips per roll, rounded up.

Strip = height + trim + repeat
Strips per roll = ⌊roll length ÷ strip⌋
Strips = width ÷ roll width (rounded up)
Rolls = strips ÷ strips per roll (rounded up)

Assumptions

  • A standard roll is 10.05 m long and 53 cm wide, but some differ, so check yours.
  • The 10 cm trimming allowance is a rule of thumb.
  • Doors and windows aren’t taken off: their offcuts rarely make full strips, and the spare helps with mistakes.

Example: a 4 × 3.5 m room, 2.4 m high, no pattern repeat

  1. Width to cover: 2 × (4 + 3.5) = 15 m. Strips: 15 ÷ 0.53 = 28.3, so 29.
  2. Strip length: 2.4 + 0.1 = 2.5 m. Strips per roll: 10.05 ÷ 2.5 = 4.
  3. Rolls: 29 ÷ 4 = 7.25, so 8 rolls.

Useful tips

  • Check every roll has the same batch number.
  • Buy a spare roll for repairs.
  • Start next to a window and use a plumb line for the first strip.

Frequently asked questions

How many rolls of wallpaper for a room?

Count the strips: the distance round the room divided by the roll width, then divide by the strips you get from one roll. The calculator does it for you.

What is a pattern repeat?

The distance before the pattern starts again. Matching it wastes some of each strip, so you need more rolls.

Do I take off doors and windows?

Usually not. The offcuts rarely make a full strip, and a little spare is useful.

Was this calculator helpful?