Tile Calculator

Work out how many wall or floor tiles to buy. Enter the area, your tile size and grout joint, and get the number of tiles with an allowance for cuts. Add the box, adhesive and grout details from your products to see those too.

Want a full plan for the job? Try the Tiling Planner. It asks a few questions and builds your shopping list, steps and supplier questions.

For odd shapes, split the area into rectangles and add the results.

From the box. 600 × 300 mm is only an example.

Use the joint your tile maker or tiler recommends. Leave blank for none, which gives you a few spare.

A rule of thumb: about 10%, more for small rooms, lots of cuts or diagonal layouts.

More options

The kg per m² printed on the adhesive bag for your tile size.

The kg per m² on the grout bag or its chart, for your tile and joint size.

Your estimate

Tiles needed

30 tiles

Includes 10% extra for cuts.

Area
4.8 m²
Tiles per m²
5.56

Based on

  • 4.8 m² of tiling
  • Tile and joint sizes from you
  • 10% extra for cuts and breakages

Estimate only. Actual amounts vary with the product, ground conditions and how it’s laid.

How the calculation works

Each tile covers its own size plus one grout joint in each direction. The area, plus your allowance, is divided by that, and rounded up to whole tiles.

Adhesive and grout are worked out from the kg per m² printed on your bags, which depend on the tile and joint size.

One tile covers (length + joint) × (width + joint)
Tiles = area × (1 + allowance ÷ 100) ÷ area per tile (rounded up)
Adhesive (kg) = area × kg per m²

Assumptions

  • Tile size, joint width, box contents and adhesive and grout coverage all come from your products. The 600 × 300 mm tile is only an example.
  • The 10% allowance is a rule of thumb. Small rooms, lots of cuts, diagonal layouts and patterned tiles need more.
  • Measure walls and floors separately, leaving out baths, shower trays and units that won’t be tiled behind.

Example: 4.8 m² of 600 × 300 mm tiles, no joint, 10% extra

  1. One tile covers 0.6 × 0.3 = 0.18 m², so 5.56 tiles per m².
  2. With 10%: 4.8 × 1.1 = 5.28 m².
  3. Tiles: 5.28 ÷ 0.18 = 29.3, so 30 tiles.

Useful tips

  • Check that all boxes have the same batch (shade) number before you start.
  • Keep a few spare tiles for future repairs.
  • In showers and other wet areas, walls are usually waterproofed (tanked) before tiling. Ask your supplier for a system that suits your adhesive.

Frequently asked questions

How many extra tiles should I buy?

A rule of thumb is about 10%, more for small or awkward rooms and diagonal layouts.

How much tile adhesive do I need?

It depends on the adhesive, the tile size and the trowel. Use the kg per m² on the bag and enter it under More options.

Do I include the grout joints?

Yes. Enter the joint width, as it slightly reduces the number of tiles needed.

Was this calculator helpful?